Details about Synergy 2.4m Concealed Door or Wall System by Sensormatic
Exceptional, invisible Sensormatic protection for wide store exits to reduce shoplifting in wide store entry/exit situations.
The Sensormatic Synergy 2.4m Concealed Detection System delivers exceptional, yet discrete, Acousto-
Magnetic (AM) EAS protection for environments that require a high vertical detection zone. This system provides
protection up to 1.8m (6ft) off the floor and exits up to 2.4m (7ft 10in) wide to maximize customer flow and optimize
merchandising floor space. This system requires limited floor cutting for efficient installation. Receiver antennas mount to the door in a selfadhesive cable channel or inside the wall of the doorway. For high-detection performance, the transmitter cable is installed under the floor. If protected merchandise passes through the detection zone, the system emits an audible alert to notify store associates. The optional 3D Overhead Traffic Counting Sensor can also be integrated and configured to provide visibility into shopper visits to help drive incremental sales and improve conversion rates.
By integrating directional traffic information with EAS alarm events, the sensors can discern between inbound
and outbound traffic. This helps reduce unintended alarms triggered by shoppers carrying protected merchandise near the exit. The system also includes a “power-on-demand” feature that puts it into low-power standby operation
during user-defined periods, such as off store hours or periods of low customer activity passing through the system.
Normal function returns once customer activity resumes. While in this mode, the system can save up to 78%* of power requirements.
This network-connected system delivers actionable data gathered from stores’ EAS and traffic devices, as well as
enables remote diagnostics and system power management. Through system configuration, “Tags-too-Close” is an offered feature developed to help store associates better manage merchandising of tagged goods at the storefront. This feature helps decrease nuisance alarms to enhance the shopper experience and reduce unnecessary, costly service calls. Another system-configured feature is Jammer Detection which triggers a system alarm as soon as an electronic signal from a jammer device is detected. This helps eliminate the threat of would be thieves using this method.
*Based on the 3D Overhead Traffic Counting System and 3004A dual configuration, power requirements savings for other configurations will vary. Actual power savings depend on how many hours/day the AMS9060 is in low-power standby operation.
Retailer Values
- Delivers exceptional protection for wider exits to help maximize flow and optimize floor space
- Enhances loss prevention efforts and increases shopper visibility through network connected store-front alarms and Traffic Intelligence
- Helps lower cost of ownership with limited floor cutting at time of install
- Enhances the shopper experience and maximizes storefront floor space with ”Tags-too-Close” feature
- Helps reduce shrink by notifying staff of the presence of a jammer device with a distinct audible alarm
Product Compatibility
Sensormatic AM Sensors
Synergy Pedestals
Pro-Max
Door-Max
Ranger Receivers
Satellite Receivers
Amorphous Core Receiver
3D Overhead Traffic Counting Sensor
Local Device Manager II (LDM II)
UltraLink
Specifications
AMS3004-A
Cap-board Enclosure
Length………………………….210mm (8.25in)
Width……………………………271mm (10.6in)
Depth……………………….. 83.75mm (3.29in)
Weight……………………………. 2.1kg (4.6lbs)
Power Supply (AMS9060)
Electrical
Primary Input
100-120Vac or 220-240Vac
50–60Hz
Primary Power Fuse
3.15A, 250V, slo-blow, hi-breaking
Current Draw
(120V) <0.29 Arms
(240V) < 0.24Arms
Input Power
(120V) <19.7W
(240V) <21.6W
Transmitter
Transmission Burst Duration………….1.6ms
Transmit Current………………….. 4.5-14Ao-p (loop size related)
Burst Repetition Rate
90Hz with 1 loop
45Hz for each loop in 2 loop system
Receiver
Center Frequency………………… 58kHz±200Hz
Receiver Coil Resistance………. 13m (40ft), 4-conductor, shielded, direct-burial, plenum-rated
Loop Cable………………………….. 18m (60ft), 2-conductor, shielded, direct-burial rated
Cap Box Power Cable…………… 13m (40ft), 2-conductor, shielded, plenum-rated
Environmental Constraints
Operating Temperature
0°C to 50°C (32°F to 122°F)
Relative Humidity
0 to 90%, non-condensing
Declarations
EMC
47 CFR, Part 15
EN 300 330
EN 301 489
RSS 210
Safety (second edition)
UL 60950-1
CSA C22.2.60950-1
EN 60950-1
CE This product is in conformity with RoHS II Directive 2011/65/EU and REACH Substances of Very High Concern as defined in Regulation (EC) No 1907/2006 and subsequent amendments to both.
Loss Prevention Systems is a leader in shoplifting reduction and a Global Authorized Partner of Sensormatic – Contact us today for info on Sensormatic loss prevention products.
